The hottest jigger control system based on embedde

2022-10-15
  • Detail

The jigger control system based on embedded PLC has been in normal operation for 8 months

the jigger control system based on embedded PLC developed by Huangshi Kewei Automatic Control Co., Ltd. has been in normal operation for 8 months and has been in normal operation in Hubei Xiantao printing and dyeing factory for more than 8 months. The superior performance of the system has been fully affirmed by users

the jigger control system based on embedded PLC is the first transmission mode. The transmission is stable. Based on the company's completed national key research plan project embedded PLC wear measurement method, which has two kinds of software, aiming at the technological requirements of the jigger for constant fabric tension and linear speed, the moment of inertia measurement and distribution algorithm and static torque measurement and control algorithm are developed and embedded into PLC (the unique advantage of embedded PLC software), Thus, a special PLC for jigger control is developed. Taking the special PLC for the control of diving supporting jigger as the core control component, the double closed-loop control of tension and speed is constructed to realize the control system of jigger with constant tension and constant linear speed

technical indicators of the system:

1. Tension accuracy: steady-state accuracy 5% dynamic accuracy 15%

2. Speed accuracy: steady-state accuracy 1%

3. Speed up and down characteristics: 0-100m/min speed up Wang Wentao said in his speech that the time is 3S, the speed down time is 3s

4. Radius measurement repetition accuracy: 2%

5. Length measurement repetition accuracy: 2%

6. Circumference positioning accuracy: 1%

Copyright © 2011 JIN SHI